Mascryl #1000
info@mas-paints.comor by filling out the form below.
- ADVANTAGES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- SURFACE PREPARATION
- METHOD OF APPLICATION
- TYPICAL RECOMMENDED SYSTEM
Good color retention properties.
Good adhesion properties.
Good weather resistance.
Good scrub resistance.
Good drying properties.
Easy of application.
Excellent dirt pick-up resistance.
Non- toxic and environment friendly.
Appearance – Liquid Pigmented
Colour – As per colour card
Gloss – Matt
Specific Gravity – 1.45 kg/L
Solid Content – 33 – 35% by volume
Coverage – 8 – 10 m2/L
Touch Dry – 1 – 2 hrs.
Dry to Recoat – 5 – 6 hrs.
Shelf Life – 12 months
Flash Point – 65°C
VOC Content – 39 g/L
Application – By brush, roller or spray
Thinning/Cleaning – Water
New Substrates:
Substrate must be dry and free from any form of contaminants.
Application of 1 coat of MAS Masonry Primer as impregnating sealer.
Apply 1 – 2 coats of MAS Masonry Primer into the substrate.
Application of MAS PVA Wall Filler to smoothen the surface.
Application of 1 – 2 coats of MASCRYL #1000 for final coatings.
Old Concrete (Previously Painted):
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry AR Primer, MAS Masonry Primer White and PVA Wall Filler uneven surfaces prior to application of MASCRYL #1000.
Airless Spray
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 5%
Nozzle Pressure – 140 – 190 kg/cm2
Nozzle Orifice – 0.21 – 0.027 in.
Roller
Recommended Thinner – Sweet Water
Volume of Thinner – Approx. 0 – 10%
Cleaning – Water
MAS Masonry AR Primer – 1 coat
MAS Masonry Primer – 1 coat
PVA Wall Filler – 2 coats
MASCRYL #1000 – 2 coats
