durashield matt
info@mas-paints.comor by filling out the form below.
- ADVANTAGES
- CHARACTERISTICS & PHYSICAL PROPERTIES
- SURFACE PREPARATION
- METHOD OF APPLICATION
- TYPICAL RECOMMENDED SYSTEM
For interior and exterior use.
Good adhesion properties.
Good water resistance.
Good scrub resistance.
Good drying properties.
Ease of application.
Excellent dirt picks up resistance.
Non-toxic and environment friendly.
Colour – As per colour card
Gloss – Matt
Specific Gravity – 1.300 ± 0.005 kg/L
Solid Content – 45% by volume
Coverage – 8 – 10.5 m2/L
Touch dry – 1 – 2 hours
Dry to recoat – 5 – 6 hours
Shelf life – 12 months
Flash point – 65°C
Thinning/cleaning – Water
Application – Brush, Roller, Spray Gun
SURFACE PREPARATION
New Substrates:
Substrate must be free from any form of contaminants.
Apply 1 coat of MAS Masonry AR Primer as impregnating sealer.
Apply 1-2 coats of MAS Acrylic Primer white into the substrate.
Application of MAS Acrylic Stucco filler to smoothen the surface.
Application of 1-2 coats of DURASHIELD (MATT) for final coatings.
Old Concrete (Previously Painted):
Remove all blistered, cracked and peeled off paint from the surface.
Penetrated paint must be cleared and treated with 3% ammonia and water.
Glossy finish coat must be sanded.
Apply 1 coat of Masonry AR Primer, MAS Acrylic Primer White and Acrylic Stucco Filler for uneven surfaces prior to application of DURASHIELD (MATT).
INSTRUCTION FOR USE
Airless Spray
Recommended Thinner Water – Sweet
Volume of Thinner – Approx. 0-5%
Nozzle Orifice – 0.46-.53 mm
Roller
Recommended Thinner Water – Sweet
Volume of Thinner – Approx. 5-10%
For cleaning – Sweet water
MAS Masonry AR Primer – 1 coat
MAS Acrylic Primer – 1 coat
Acrylic Stucco Filler – 2 coats
Durashield (MATT) – 2 coats
