epoxy based paints
epoprime basecoat
Good adhesion properties
Excellent chemical resistance
Compatible
Good weather resistance
Abrasion-resistant
Colour -White, Red Oxide, Gray, Yellow Oxide
Appearance -Eggshell
Specific Gravity – 1.40 kg/L
Volume Solids – 50%
Flash Point – 250C
Pot Life – 6 hrs.
Surface Dry – 5 hrs.
Steel:
Metal surfaces should be free from grease, oil and other contaminants. Grit blasting to Sa2 ½ is much preferred to wire brushing and other methods of abrasion. Immediately after blasting the surface should be primed with EPOPRIME BASECOAT.
Concrete:
New concrete should be cleared at least 28 days. Apply one (1) coat of multi-etch solution, rinse and let it dry. Surface should be free from laitance, loose debris and other foreign contaminants prior to the application of EPOPRIME BASECOAT.
Wood and Plastics:
Surface to be primed should be free of rust, dirt, oil and grease. Apply 1 coat of Uniseal #110 P as a surface conditioner for a better anchorage of EPOPRIME BASECOAT.
Application Method – Brush, Roller, Airless and Conventional Spray
Spray Data – Conventional Spray
Nozzle Orifice – 2-3 mm.
Nozzle Pressure – 43-57 psi.
Dilution – 5-10%
Thinner – EP Thinner #135
Airless
Nozzle Orifice – 0.38–0.46 mm.
Nozzle Pressure – 1138 psi
Dilution – 0-5%
Thinner – EP Thinner #135