Polyurethane paints
PU hi-gloss #2240 white
Appearance – Liquid Pigmented
Colour – White
Specific Weight – 1.25 kg/L
Viscosity (25°C) – 38” FC#4
Flash Point – 25°C
Non-Volatile – 45%
VOC Content – 580 g/L
Gloss (60%) >95
Application Condition
Air Temperature 5 -35°C
Relative Humidity 85% max.
Application Method – Conventional or Automatic Spraying
Recommended Catalyst – Catalyst #036
Mixing/Dilution Ratio (FC#4 @ 13-15 sec.)
Base – 100
Cat. – 50
Thinner – 15-20
Pot Life (25°C) – 3 – 4 hrs.
Drying Time (25°C)
Dust Free 20 – 25 mins.
To Touch 45 – 60 mins.
To Recoat 2 – 3 hrs.
Hard Dry 24 – 36 hrs.
Coating Rate – 7 – 9 m2/L
Pencil Hardness – H -2H
Recoating
One coat may be sufficient for ordinary finish. However, one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 grit sand paper is recommended before subsequent coats when recoating time exceeds 3 hrs.
Recommended Basecoat – PU Primer White or Plastofil #350 White
It should be cleaned, well-sanded and free from dust, oil, water and other contaminants to ensure long lasting effect.
To obtain a smooth finish, ensure that the basecoat is sufficient to avoid uneven and irregular surface.
For cracks, crates and nail holes, it is advisable to fill with either Putty Filler. NC Putty #2185 White or Polyester Putty.
Apply 1-2 coats of PU HI-GLOSS #2240 WHITE horizontally and vertically.
