Polyurethane paints
PU gloss #2140 white
PU GLOSS#2140 WHITE is a polyurethane material based on poly-functional saturated polyester resin. It is formulated to give a maximum glossiness and whiteness, thanks for the high quality of raw materials. Furthermore, PU GLOSS #2140 WHITE is resistant to both extreme weather with no-yellowing effect resistant to abrasion and provides a very smooth finish.
Appearance – Liquid White
Specific Gravity (20°C) – 1.23 +/-0.2 kg/L
Viscosity (25°C, FC #4) – 40 – 60 sec.
Flash Point – 21°C
Non-Volatile (Wt.%) – 65 +/- 0.5
VOC Content – 510 g/L
Gloss (60%) – 90 – 95
Application Condition
Air Temperature 5 -35°C
Relative Humidity 85% max.
Application Method – Brush, Spray, Roller
Recommended Catalyst – Catalyst #016
Thinner – 105/ 205
Mixing/Dilution Ratio (FC#4 13-15 sec.)
Base – 100
Cat. – 50
Thinner – 20-25
Pot Life (20°C) – 5 – 6 hrs.
Drying Time (20°C)
Dust Free 15 – 17 mins.
To Touch 45 – 60 mins.
Hard 2 – 3 hrs.
Coating Rate – 8 – 10m2/L (110-130g/m2)
The surface to be top coated should be primed with either Polyurethane Primer or Polyester Primer White.
It should be cleaned, well-sanded and free from dust, oil, water and other contaminants to ensure long lasting effect.
Apply 1-2 coats of PU GLOSS #2140 WHITE, horizontally and vertically.
In any case that recoating is required, 1-2 coats may be sufficient for ordinary finish; however, additional coats can be applied wet on wet. If necessary. Light sanding with 600-800 grit sandpaper is recommended before subsequent coats.
