Polyester based paints
Plastofil #350
PLASTOFIL #350 is thixotropic pigmented polyester based on non-wax unsaturated polyester with selected pigments and fillers. It is hardened by the reaction of accelerator (organic salt of cobalt) and catalyst (solution of peroxide in plasticizer). Due to tis thick film, it gives a good covering ability and minimizes the number of coats required.
PLASTOFIL 350 is best for all types of woods, veneers and furniture. It is highly recommended for chairs, doors, moldings, toys and frames. Due to the typical rigidity of polyester, we suggest to use for indoor furniture.
Appearance – White Liquid
Specific Gravity – 1.150 kg/L
Flash Point – 21°C
Solid Content – 75% approx.
Coverage – 5 – 7 m2/L
Storage Life – 6 months
Pot Life – 2 hours
Take enough PLASTOFIL 350 and add 2% of Accelerator #285. Mix thoroughly until homogenous solution is obtained. Carefully add 2% of Catalyst into the mixture and mix thoroughly, add polyester solvent (acetone) for thinning at the required consistency and spray immediately on the surface to be primed.
Prepare first the surface to be primed with polyester primer #350 before mixing the solution.
Apply 1 – 2 coat of MAS Isolator #100 before applying PLASTOFIL 350.
Spray 1 – 2 coats of the mixture if used in a horizontal position and 1 – 2 coats on vertical position.
Dust Free 25 – 30 minutes
Set to Touch 2 hours
Sandable 5 – 6 minutes
