General & Speciality products
HIGH HEAT ALUMINUM
HIGH HEAT ALUMINUM is a silicon-based coating carefully formulated to withstand high temperature without excessive deterioration. Also designed to resists oil, grease, fuel, mild acid fumes and other corrosive elements. It resists up to 600ºC.
Ideal to use on steel items exposed to extreme temperatures like chimney, furnace, exhaust, pipes, engine parts, smoke stacks, boilers, steam tables, and cooking vats.
Colour – Aluminium
Volume solid – 36
Specific gravity – 1.0 kg/L
Flashpoint – 36ºC
DFT – 25 microns
Coverage – 14 m2/L
Method of Application – Brush, Roller, Airless and Conventional Spray
Conventional Spray – Nozzle Orifice 2 – 3 mm, Nozzle Pressure 43 – 57 psi
Dilution – Thinner #175
Airless Spray – Nozzle Orifice 0.38 – 0.46 mm, Nozzle Pressure 1138 – 1710 psi, Dilution – Thinner #175
The temperature of the substrate should be a minimum of 30C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate.
Drying Time:
Dry surface – 2 hours
Hard dry – 4 hours
Recoat – 1 hour
Recommended System:
HIGH HEAT ALUMINUM – 2 coats
